Build Your Own Bluebird Box

Building Directions:

1. Cut out the back, front, two sides, roof, and bottom.

2. Drill the entrance hole.

3. Drill the air holes on the sides and the bottom.

4. Begin to screw the box  together.  Start with one side, the front, the floor, the roof and the back (center on the back).

5. Then add the second side, which will be a swinging side door.  It should be placed about 1inch below the roof.  When securing use only three screws.  The top two screws will allow the door to pivot and swing open for checking and cleaning.  The third screw will secure the side closed and does not need to be fully tightened.